Brumby Multishine Polishing Compound (Light Blue)

For a high gloss finish on most plastics, fine metals and diecast articles

The Brumby Multishine Polishing Compound is ideal for achieving a high gloss finish on most plastics, silver, gold and die cast articles when in use with a Josco Loose Leaf Calico Buff.

Different metals have varying characteristics, and to achieve the best possible results it is essential that the correct polishing compound and buff are selected for the job.

Specifications

Part number: MULTISHINE

Barcode: 9314028001309

Size: Standard

Colour: Light blue

 

Directions For Use:

  1. Most buffs have a tapered centre bore, and may be mounted on the left or right of your grinder using a tapered spindle.
  1. Select the correct buffs and compounds for your job. Initial cutting can be done with a fastcut compound and either a stitched sisal or a stitched rag buff followed by a polishing compound and a loose leaf buff. For best results, never use different compounds on the one buff – keep a separate buff for each compound.
  1. Apply the compound across the face of the rotating buff for a few seconds, taking care not to apply too much compound which will overload the buff. It is far better to apply a little compound more frequently than to over dress the buff.
  1. After applying the compound to the buff, bring the work piece into contact with the buff and with light pressure, move back and forth across the job.
  1. After polishing, remove any compound residue left on the work piece with mineral turpentine or methylated spirits, or warm soapy water.

(JO-MULTISHINECAR)

Barcode # 9314028001309
Brand Josco
Reviews