Josco 12mm Right Hand Tapered Spindle JTS012R For Bench Grinder

Tapered spindles are used to allow the fitting of polishing buffs and wheels to bench grinders and sander/polishers. 12mm internal thread. Screws onto the RHS of your 150mm (6") bench grinder.

Instructions For Fitting A Tapered Spindle To A Bench Grinder

• Step 1: Remove outer guard, grinding wheel and inner guard from the side of the machine that the tapered spindle is to be fitted to.
• Step 2: Screw on the tapered spindle. Note: the internal thread of the spindle is counter bored to allow the spindle to cover the entire grinder shaft length.
• Step 3: Carefully screw the buff onto the tapered spindle with the thickest flange facing inwards. Screw on as far as the buff will reasonably fit.
• Step 4: Turn on bench grinder and the buff will tighten further against the tapered spindle.

Specifications

Part number: JTS012R

Barcode: 9314028000029